jasextra.blogg.se

If that does not work, then the address will be one or two addresses removed, such as. For example, if the cellular IP address is 63.47.88.25, the address of the GUI is 63.47.88.24. In order to access the GUI of the modem, the IP address is typically 1 address below the cellular IP Address. When the IDG400, MDG100, or MDG200 is in “Modem” mode, it receives an IP Address from the cellular network and passes that address to the attached device. The default user/password is either “admin”/”admin” or “admin”/”admin12345”.

On the PC, browse to 172.16.0.1 to reach the GUI of the internal Modem. By default, for example with OPNsense or pfSense® CE, the Vault will provide a an IP address to the PC via DHCP, typically 192.168.1.100. Once installed correctly, connect a PC to the LAN port of the vault.

To reach the internal 4G LTE Modem, the unit must be installed in the Vault and an Operating System (OS) must be installed and configured to recognize and use the internal modem. On the PC, browse to 192.168.123.254 to reach the GUI. By default the 4G LTE Modem will provide a an IP address to the PC via DHCP. To reach the GUI of the External IDG400 modem, connect the Ethernet cable to a computer. The IDG400, MDG100, MDG200 have a web based GUI. Depending on the service ordered or if the customer provides their own SIM or equipment, some configuration may be needed on the 4G LTE Modem. And the 4G LTE service can be ordered without a Protectli 4G LTE Modem, using the customer’s own equipment. The 4G LTE Modems can also be ordered without service, using the customer’s SIM. The unit is tested with that service before it ships from the factory. When the 4G LTE Modems are ordered with a service, a SIM is provided with the unit and the service is activated by Protectli. The MDG100 and MDG200 require a 4FF Nano SIM.

For deployment outside of the US, consult Protectli sales at 4G LTE cellular service requires a SIM card for operation. The 4G LTE Modems support all of the cellular services listed on the main 4G LTE page for Verizon, AT&T, and T-Mobile in the US. The actual data throughput will depend on the installation environment and physical placement of the unit and antennas.

The MDG200 can be found on this product page.īoth are Category 4 LTE, which indicates that the maximum downlink speed is 150 Mbps and the maximum uplink speed is 50 Mbps. The MDG100 can be found on this product page. The IDG400 can be found on this product page. There is an external modem, the IDG400, an internal modem, the MDG100, compatible with the FW2B, FW4B, and FW4C and the MDG200, compatible with the VP4600 series. The 4G LTE products can be found on the main 4G LTE page. Protectli offers 3 options for a 4G LTE Modem.